点击这里给我发消息
中 文 版 ENGLISH
 
 
Jelly glue
Paper / plastic
sealing glue
water-based stereotype
construction wood
laminating adhesive
textile treatment
 
Products You are here:Home--Products
   
 
     
  XS-158 stem re-glue
Details:
(A), the product characteristics and uses:
The Department of water-based adhesive glue used in laminating machine with a drying Road, suitable for a variety of color printing paper and BOPP, PE, PET, PP and other thin-film high-speed composite. Products and strong adhesion, transparency, luster bright, environmental pollution, is a kind of environmentally friendly products.
(B), quality indicators:
1, Appearance: milky white liquid with a blue fluorescence
2, product performance, in line with the following table:
Project Index
Solid content% 47 ± 2
PH Value 5-8
Viscosity mPa.s 25 º C 150-800 (based on user request)
Peel strength is greater than the affinity of ink on paper or paper body strength

(C), using methods: (first determined using the need to conduct another test sample volume)
1, the laminating machine heat stick temperature rose to 50 º C-90 º C, drying of temperature rise 60 º C-90 º C, machine speed up to more than 800r/min.
2, the adhesive into the plastic tank, starting glue roller, the roller immediately after laminating adhesive and mix thoroughly, without adding any solvent to the deployment.
3, if the composite white board paper, coating of BOPP film came out from the baking Road, brought glue without completely drying, hot roll through after pressure from both sides of the extrusion from the membrane can not be suitable; if the composite coated paper or printing there are gold and silver ink product must be completely dry.
4, coated products can be directly cut, peel strength after 24 hours can reach the highest value.
5, machine speed is fast or slow drying Road, hot roll temperature and the amount of glue should be according to the size of the device, the composite type of product and the actual situation of different flexibility.
(D), storage Packing:
Plastic barrel 25kg, 50kg packing. The use and storage and transportation of sunscreen should be insulated, storage temperature of 5 º C-30 º C in the sealed environment of storage, in this condition for the production of shelf-life of six months from the date.
(5), Note:
1, storage temperature must not fall below 4 º C.
2, this product does not allow unauthorized, add water, or mix with other products.
3, the lower the ambient temperature in winter, dry and complex products to avoid prior to a long-term low temperature storage.
4, stopping in time for clean water glue sticks; if shut down for too long glue crust should be filtered, cleaning roller after use.
5, gold and silver ink printed surface of the proposed first hit kind of confirmation before processing of color retention and adhesion strength.
6, composite products if the following conditions or after-processing is required to conduct the first test sample mass found: embossed, embossing, wall paper, rough paper, ink, or dry thick oil a large printing surface of the gold and silver printing ink printing paper for composite surfaces and so on.
7, the corona with the film must be qualified.
8, widely used, please be sure to first conduct a small amount of laminating tests to determine the conditions for good after the laminating operation can be put into use a lot in order to avoid losses.
 
 
 
 
Fujian, Jinjiang Xingsheng Chemical Co., Ltd Copyright(C):Fujian, Jinjiang Xingsheng Chemical Co., Ltd  
Contact | Message